Your Family Will Thank You For Having This Peugeot Keys
Peugeot 208 Key Replacement
Peugeot 208 key replacement should be left to auto locksmiths with experience who have the appropriate equipment and know-how. They can program and create keys faster and cheaper than dealers.
peugeot 207 key fob is most likely to be at fault when your key fob stops locking or unlocking doors. There are many other reasons that the key could be malfunctioning.
Dead Coin Battery
A dead coin battery will stop your Peugeot 208 from locking and unlocking, as well as making it impossible to start the engine. If this is the case, you'll need to utilize the backup starting method that is described in the owner's manual to your vehicle.
The spark plugs can also be worn out. The spark plugs are responsible for igniting the fuel which starts the engine. They only last for a certain amount of time. They'll eventually degrade when they aren't used enough.
Luckily, there is an easy solution to this issue. Check the voltage of the battery using a multimeter. If the voltage is less than 11,5 volts, it's the time to replace it. It is also essential to clean the contacts of the battery if it has corrosion. This can be done by removing the rubber cover from the two terminals on the battery and then using a wirebrush, you can remove any parts of the battery that are corroded. Then, reconnect the positive and negative pole cables.
Water Damage
If your 208 will not start and the battery has not been replaced, you must examine the spark plugs. It could be that they are overly dirty, causing them not to spark. This can be fixed by cleaning the spark plugs in the workshop.
Peugeot cars are equipped with keys that are transponder-type and works with the car's immobiliser system. This ensures that only the correct key can start the engine. If the chip inside the Peugeot key is damaged, it will not transmit the proper signal to the vehicle.
This is a frequent issue that can be caused by water damage. This is a common problem in more cold climates where the car has been exposed to snow or rain. If this is the case, you should get in touch with a reputable locksmith who has all the tools and equipment required to modify the new key. They also have the latest technology and the machinery needed to make the Peugeot 208 smart key. The process shouldn't take longer than 15 minutes.
Faulty battery contacts
Peugeot replaced the transponder chips using a new type that uses electronic components that are mounted on a circuit board. The new system is effective when it's brand new, but over time the circuit boards start to lose their effectiveness and cease working correctly.
This can prevent the immobiliser from triggering so that your vehicle won't be able to start. If this happens, it's best to get in touch with a Peugeot specialist or locksmith.
A common issue is when the battery in the key fob starts to die. This causes the blade of the key to stop feeding into your lock. A locksmith in your car will replace the battery, and cut a new blade for you. This is a simple solution.
Faulty Receiver Module
It could be that the receiver module is faulty when your Peugeot key fob doesn't work after being dropped on the floor, exposed to a stormy rainstorm, or accidentally washed. The receiver is responsible for transmitting radio frequency signals to the onboard computer, which controls the central locking system in your Peugeot vehicle.
The rubber seals on the key fob block water from reaching the electronic chip. However prolonged exposure to water may cause damage to these seals and the chip. Submerging the key fob in sea water at the beach or throwing it into the pool could be particularly damaging due to the high salt content.
The module must be replaced if your Peugeot spare key is no longer working. This can only by done by an Peugeot specialist or an expert auto locksmith. Like other automobiles, Peugeot keys are protected by an unique immobilizer system that requires the correct programming in order to start the engine. This is the reason why you should only choose a reputable Peugeot locksmith with the task of programming and creating an alternative.
Computer on-board is not working properly
The computer on board of your Peugeot is responsible for various systems in your car, including airbags and power windows. If something is wrong with these systems, they will usually display a code that indicates the problem. The code is stored in the system until the issue is resolved. This can often mean that the on-board computers to be replaced.
One of the most frequent reasons for the airbag light coming on is loose or corroded connections in the airbag sensor. This can occur due to wear and tear, ageing, or exposure to salt and moisture. It is crucial to get this issue resolved as soon as possible, as an airbag that is not functioning properly could be risky in the event of an accident.
If you encounter an error message that says "card not found" on your Peugeot, the key battery in the key fob could be dead or weak. This will stop the key fob sending a signal to deactivate the vehicle's immobilizer. Test this by pressing the unlock button on the fob's key and then trying to start your car. If it doesn't work it is because the battery of the key has to be replaced.
