Why We Do We Love Fiat 500 Replacement Key Cost And You Should Also

Fiat 500 Replacement Key Fob

It's possible to change the battery if your 500 remote key fob is not working. If you replace the battery, but it doesn't work it could be the issue somewhere else.

United Locksmith specializes in the creation of new keys for classic vehicles. We have the tools and spare parts needed for this job.

Dead Coin Battery

The most common reason your Fiat 500 key fob will not unlock or lock the doors is a dead battery. The key fob is equipped with an in-built battery that is prone to draining quickly when it isn't frequented enough. If your remote began to show signs of weakening such as a loss in range and stopped working completely The battery is probably dead.

fiat 500 replacement key fob inside the key fob is secured by metal retaining clips. If the clips aren't secure, they can cause problems with contact, which can prevent your remote from receiving power. Utilizing a small screwdriver, pull the clip that holds the retaining pin open to take out the battery, and replace it with a brand new one. Make sure to use a battery with the same voltage, size, and specification as the original.

The key fob might also become corroded or damaged due to exposure to water. Even a brief shower in soapy water can cause damage to the electronic chip inside. It's best to keep your key fob in a dry area.

Water Damage

If your key fob isn't operating properly, it could be due to water damage. Key fobs are fitted with rubber seals that protect them from being damaged by light rain or splashes of water. However, it is essential to keep your car keys away from the pool, ocean and washing machine!

The key fob comes with an electronic chip in it that sends a signal to your car's immobilizer system. The chip is what allows the 500 to be locked and started. If it gets wet, however it won't work.

If you want to check if your key fob is still functioning, you can clean the internal electronics with isopropyl or an electronic cleaner. However, it's recommended to purchase a replacement from a dealer instead of trying to fix the key fob that was submerged in salt water.

A replacement fob might cost you a few dollars, but it's a lot cheaper than having to have your Fiat 500 towed to a dealer and fixed there! In addition, you can do it yourself with a few easy steps. Be sure to use the right battery type before you attempt to open your key fob. You can find step-bystep instructions for every car keyfob online.

Faulty Chip

The chip in the key fob communicates with the immobiliser of your vehicle to ensure that the vehicle will start only when the right keys are in place. If the chip is damaged, or corrupted in any way, your car will not start.

Damage to the water or a dead cell battery are the most frequently cited reasons for an unreliable chip. It is best to delegate the job to a professional locksmith, who can repair the chip quickly and at reasonable cost.

If your key fob stops functioning after exposure to clean water from the tap or rain, take out the battery and wipe down the electronic component with a paper towel to ensure that it is completely dry before putting it back into. If the key fob still fails to work, it is likely an issue with the chip and will require replacement.

A few people turn to their dealer when they are in need of an entirely new Fiat key fob, however this could be a costly alternative. United Locksmith is the best place to go if you want your Fiat key fob repaired at a reasonable cost. We have the equipment and know-how required to repair your Fiat key fob in a timely and professional way.





Faulty Receiver Module

Fiat key fobs send an electrical signal to the vehicle, which will unlock and close doors (and start the car for those with an automatic transmission) up to 50 feet. There are a few reasons why the fob could not function. These include a dead coin battery water damage buttons, worn ones as well as a receiver module problem and signal interference or an electronic chip that has failed.

If the fob is in a pocket that has experienced extreme trauma, like being dropped on hard floors or being washed in a washing machine the fob may not be capable of communicating with the car's Body Control Module (BCM). The BCM is a security device that will only accept signals from genuine keys.

You'll have to replace the fob if this happens. A professional locksmith can take care of all aspects of the key replacement procedure as well as programming a new one for the 500. They can even provide you with the fob cloned to work exactly like the original (and costs a fraction of the price).